Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
AT 89C2051 TAFE Programmer
I made TAFE programmer for programming 892051 & used IC programmer
software (from www.ic-prog.com). But it didn't worked. on searching the net i found on one of the pages that the new 892051/ 4051 are not supported by TAFE. I would like to know whether anyone is using the TAFE programmer & the credibility of programmer. Ankur Kashyap ) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
CH Programmer | UK diy | |||
CH Programmer | UK diy | |||
Replacing Sangamo 410 programmer / timer - solution | UK diy | |||
CH / Boiler Firing even though Programmer is set to off when room thermo is up! | UK diy | |||
Glow-worm programmer and boiler change | UK diy |