Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Mr. Lee
 
Posts: n/a
Default Toshiba model cn3281b vert problem

What caps will cause problems with vert sweep like fold over at the top of
the screen and half sweep thanks!


  #2   Report Post  
john
 
Posts: n/a
Default Toshiba model cn3281b vert problem

Those that are around the Vertical Output IC
also 1 very close to Jungle IC.

kip

--
"Watch the return E-Mail addy its false"
"Mr. Lee" wrote in message
...
What caps will cause problems with vert sweep like fold over at the top of
the screen and half sweep thanks!





  #3   Report Post  
john
 
Posts: n/a
Default Toshiba model cn3281b vert problem

Those that are around the Vertical Output IC
also 1 very close to Jungle IC.

kip

--
"Watch the return E-Mail addy its false"
"Mr. Lee" wrote in message
...
What caps will cause problems with vert sweep like fold over at the top of
the screen and half sweep thanks!





  #4   Report Post  
max
 
Posts: n/a
Default Toshiba model cn3281b vert problem

This is very common problem in Toshiba TV
First of all check all caps around vertical output IC
Next step check two caps which is stay very close to Video/Chroma IC.There
is sync impulses goes to vertical output IC.This two caps has 1MfX16V
capacity.Replace them both.I hope after all of this problem will be gone.
Thanks
"john" wrote in message
.. .
Those that are around the Vertical Output IC
also 1 very close to Jungle IC.

kip

--
"Watch the return E-Mail addy its false"
"Mr. Lee" wrote in message
...
What caps will cause problems with vert sweep like fold over at the top

of
the screen and half sweep thanks!







  #5   Report Post  
max
 
Posts: n/a
Default Toshiba model cn3281b vert problem

This is very common problem in Toshiba TV
First of all check all caps around vertical output IC
Next step check two caps which is stay very close to Video/Chroma IC.There
is sync impulses goes to vertical output IC.This two caps has 1MfX16V
capacity.Replace them both.I hope after all of this problem will be gone.
Thanks
"john" wrote in message
.. .
Those that are around the Vertical Output IC
also 1 very close to Jungle IC.

kip

--
"Watch the return E-Mail addy its false"
"Mr. Lee" wrote in message
...
What caps will cause problems with vert sweep like fold over at the top

of
the screen and half sweep thanks!









  #6   Report Post  
Asimov
 
Posts: n/a
Default Toshiba model cn3281b vert problem

"Mr. Lee" bravely wrote to "All" (01 Oct 03 15:41:00)
--- on the heady topic of "Toshiba model cn3281b vert problem"

ML From: "Mr. Lee"

ML What caps will cause problems with vert sweep like fold over at the
ML top of the screen and half sweep thanks!

If you have half a screen then the problem is more likely the vertical
output rather than a cap. Caps tend to show shrinkage rather than
outright missing halves but it may happen (rare) a cap opens completely.
Foldover is simply the vertical ouput clipping from either a low supply,
low gain, or an offset.

Vertical problems have become the bread and butter of the tv service
industry. I'm sure tv designers can make a vertical output that wouldn't
require any caps but it may mean the tv would last too long. In fact
with judicious design almost no electros would be needed in any circuit.
It's only a matter of convenience (and laziness?) since we're so used to
having them available. Example in the mid to late 70's DCCL amplifiers
finally achieved not having any capacitors in the signal chain at all.

Asimov
******

.... This message transmitted on 100% recycled photons.

  #7   Report Post  
Asimov
 
Posts: n/a
Default Toshiba model cn3281b vert problem

"Mr. Lee" bravely wrote to "All" (01 Oct 03 15:41:00)
--- on the heady topic of "Toshiba model cn3281b vert problem"

ML From: "Mr. Lee"

ML What caps will cause problems with vert sweep like fold over at the
ML top of the screen and half sweep thanks!

If you have half a screen then the problem is more likely the vertical
output rather than a cap. Caps tend to show shrinkage rather than
outright missing halves but it may happen (rare) a cap opens completely.
Foldover is simply the vertical ouput clipping from either a low supply,
low gain, or an offset.

Vertical problems have become the bread and butter of the tv service
industry. I'm sure tv designers can make a vertical output that wouldn't
require any caps but it may mean the tv would last too long. In fact
with judicious design almost no electros would be needed in any circuit.
It's only a matter of convenience (and laziness?) since we're so used to
having them available. Example in the mid to late 70's DCCL amplifiers
finally achieved not having any capacitors in the signal chain at all.

Asimov
******

.... This message transmitted on 100% recycled photons.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
RCA Rear Projection TV Problem - Model Number P52955 Karl Haldeman Electronics Repair 1 July 21st 03 10:56 PM
Toshiba vertical problem David Wolff Electronics Repair 1 July 18th 03 09:41 PM
Toshiba laptop power problem Rudolf Ladyzhenskii Electronics Repair 1 July 16th 03 07:50 PM


All times are GMT +1. The time now is 10:54 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"