Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Sidney
 
Posts: n/a
Default Popular CD spindle motor part #'s

As you all know we are having more and more difficulty sourcing
consumer electronic repair/replacement parts specially in Canada,my
local authorized parts distributor stopped selling RCA & SK Thomson
parts several years ago and a couple of weeks ago Hitachi and now they
might stop selling Panasonic parts.
I am looking for as many different part #'s for those popular 6 volt
CD spindle motors used in household CD players,mini stereos (book
shelf) and portable units (boom boxes),I need the part #'s for the cd
spindle motor with a shaft length of 0.90"-0.95" (22.9 mm-24.0 mm)they
are the ones with the longest shaft lengths.
I have the following part #'s for those Mabuchi motors:

PRB # CD23
Global Electronics # CDM-4
Global Electronics # CDM13
Cathray Electronics # CDM-4
Cathray Electronics # CDM-13
JVC # QAR0130-001
Panasonic # SJGDRF310T-4 (no longer available)

Note:I cannot get the above part #'s locally in my area and I don't
have enough parts required to place an order out of province as
business is getting slower and slower.
Thanks in advance for those part #'s.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mill spindle bearing replacement questions Peter Grey Metalworking 3 June 16th 04 08:37 PM
Kelton Balancer Review Draft--long Lyn J. Mangiameli Woodturning 0 October 29th 03 03:44 AM
Spindle wobble... Todd Rearick Metalworking 9 September 8th 03 04:14 PM
Spindle rebore/grind for a Denbigh horizontal Kathy Metalworking 3 August 31st 03 12:04 AM
Curious micrometer design Eide Metalworking 9 August 8th 03 01:49 PM


All times are GMT +1. The time now is 09:32 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"