Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.audio.tech,sci.electronics.repair
|
|||
|
|||
Paradigm PS-12 subwoofer amp. repair tip.
Paradigm didn't supply schematics to these when I worked for a dealer
but a friend asked me to see if I could fix his. I wasn't very optimistic but I said OK. There was a slight hum when it was turned on but there was no output of the input signal. If the shield of the rca cable was touched, the hum increased slightly. I thought the input rca jacks looked familiar from a repair I did years ago where there was no continuity from the shield to solder tab.. Some how the plate the shield of the rca jacks connect to separates from the solder tab. Without destroying the jack assy., it is impossible to see what breaks. Running a wire from the shield plate to the connection underneath the circuit board repaired the amp. Chuck |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
The Equinox Paradigm Series | Home Repair | |||
paradigm subwoofer buzzing looking for advice. | Electronics Repair | |||
Paradigm SubWoofer Low Level Input - Interface Standards? | Electronics Repair | |||
bose acoustimass subwoofer repair | Electronics Repair | |||
JBL PSW-D110 SUBWOOFER PROBLEM AND REPAIR PARTS I HAVE AVAILABLE | Electronics Repair |