Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 12,924
Default Pet hates ?


Arfa Daily wrote:

"David Nebenzahl" wrote in message
.com...
On 1/21/2011 5:43 PM Arfa Daily spake thus:

He was in sunny Caffy-lornia ... Costa Mesa in Orange County, a few
miles down the Interstate from LA


OK, Arf, a small lesson in regional US dialects, free of charge:

Nobody here in "Cal-ee-fonia", as our recently departed
Governator/Gropenator called it, calls them "interstates", even though
they are, in fact, interstate highways. Some folks back east may call them
that, though I'm not sure (I've heard them referred to as "turnpikes" in
some places). One wonders whether some LA residents even know what an
"interstate" is ...

In any case, just in case you actually visit Caleefonia sometime in the
near future, you should also be aware of an important difference in usage
between SoCal (basically El-Lay and environs) and NoCal (San Francisco and
thereabouts). Down there, they don't use *any* noun for a road (highway,
interstate, etc.), but they do use articles with the road number, as in
"the 405", "the 101", etc.

But bewa up here in the Beige Area, where we like to think we're so
much superior to our SoCal cousins, we never use the article, saying
instead "take 80 to get to Berkeley" or "take 101 to 280 to 17 to get down
to Santa Cruz". (One can easily spot newcomers to San Francisco who refer
to "the 80" or "the 101". That's just SO wrong!)


--


Thank you for that enlightening dissertation ! However, as you say, it's not
actually *wrong* to call them Interstates - for that is what they are, as
evidenced by their designation "I" xxx - just 'not quite right' in your neck
of the woods. It's been a while since I was last in California, but I'm sure
I recall the I5 being referred to as 'The Interstate' by the guys in the
factory that I used to visit. Maybe in 20 years, or whatever it is now, the
usage of the term has changed. I could be wrong, but I thought that the big
road running just to the west of the Las Vegas strip was referred to locally
as 'The Interstate' or 'The Freeway', likewise the I75 and I95 in Florida,
although I have seen this term 'turnpike' over the that side of the country.
Perhaps Michael can enlighten us on the usage of the words over there in
'gator country ... ?



The 'turnpike' is a toll road. http://www.floridasturnpike.com/


--
You can't fix stupid. You can't even put a band-aid on it, because it's
Teflon coated.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT - Spinning yourself a legacy when everyone hates you.... Wes[_2_] Metalworking 1 January 4th 09 03:29 AM
OT - Spinning yourself a legacy when everyone hates you.... Wes[_2_] Metalworking 3 January 4th 09 03:28 AM
OT - Spinning yourself a legacy when everyone hates you.... Wes[_2_] Metalworking 0 January 4th 09 03:05 AM
OT - Spinning yourself a legacy when everyone hates you.... Wes[_2_] Metalworking 0 January 3rd 09 09:33 PM
OT - Spinning yourself a legacy when everyone hates you.... Wes[_2_] Metalworking 0 January 3rd 09 07:48 PM


All times are GMT +1. The time now is 11:07 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"