Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
followup: Carver PM-1.5a amp
First time of meeting this triac drive rather than protection concept
Upping to 90 percent mains the current draw drops from the 0.5 amp of 80 percent maions to .2amp approx and then at 100 percent approx .25 amps, now to test under heavy load |
#2
Posted to sci.electronics.repair
|
|||
|
|||
followup: Carver PM-1.5a amp
What is the prognosis for PAT/insulation testing of these "magnetic field"
amps, knocking out diac/triac etc ? with 3.9M, R8, between ground and one side of the mains transformer. Triac protection ccts are isolated from ground, IIRC, where used in amps. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Carver PM-1.5a amp | Electronics Repair | |||
Carver TX-2 | Electronics Repair | |||
Carver PM-1.5 Amp Help | Electronics Repair | |||
Carver TX 11a Tuner | Electronics Repair | |||
Carver PM-200 | Electronics Repair |