Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.rec.audio,uk.rec.audio.vinyl,sci.electronics.repair
|
|||
|
|||
Rega RB300 turntable...
Hi all
Anyone happen to know the value of the resistor in the CR network connected in the synchronous motor feed ? Looks like brown - red - brown so 120 ohms, but it's well overheated and discoloured, with a nice burn mark right around the spiral element, right in the centre. Can't get a reading from either end to the burn point. Looks at a guess to be rated about 3 -5 watts. Anybody think of a reason *not* to use a wirewound rather than the original metal film type ? Arfa |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
to those that helped with my turntable | UK diy | |||
OT--USB turntable | Home Repair | |||
Microwave turntable | Home Repair | |||
TURNTABLE TO BOOM BOX | Electronics | |||
Turntable Help | Electronics Repair |