 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Any hints/tips for removing a 5x5 ball grid array chip?
Removed in good order for re-use that is . No specialised tools available
and I'm not going out to buy any for a once in a year job. I have a few ideas but have never had to do it in earnest before. There is about 0.05 mm clearance space between the balls under the chip and about 5 x 5mm in size. A few minor SM can be removed from the opposite face of the board, multilayer and about 1mm thick |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Hints and Tips | Electronic Schematics | |||
| HINTS AND TIPS | Woodworking | |||
| Optical Linear Array Chip Identification - Old Scanner | Electronics | |||
Threaded Mode
