Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
A method for cleaning printer fuser rollers
Fuser rollers can develop a band of baked-on toner which is difficult
to remove because it is harder than the fuser's PTFE coating. I have developed a cleaning method which has worked well for me so far. First, wipe the roller with a swab or soft cloth and a few drops of isopropanol. Next, stick a piece of packing tape onto the roller where the toner has adhered and rub it so that it sticks well. Finally, pull off the tape in the direction of a tangent line to the curve of the roller so it 'snaps' off rather than peeling it off. It may take a few tries, but the toner should come off in large pieces. A blast of cold spray can help with stubborn deposits. It isn't necessary to remove the roller from the fuser with this method--just work in small sections and turn the roller a bit more each time. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Thermostat for laser printer fuser temp? | Electronics Repair | |||
Laser printer fuser lamp | Electronics Repair | |||
Samsung SCX-4100 printer fuser - repairable? | Electronics Repair | |||
cleaning planer rollers | Woodworking | |||
Cleaning planer rollers? | Woodworking |