Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
NEC MultiSync LCD1555V
hey again, I've got an NEC MultiSync LCD1555V here, which a friend
gave to me, and it's not working right. you turn it on, and the screen is lit up, but no picture - or so I thought. after disassembling it, and not finding anything visibly wrong with it, I put it back together and as I was putting the case back together I figured I'd plug it in and try it again right quick. I did so, and I was holding it at an angle. apparently there is picture. it's just so bright that it's not visible generally. you have to look at it in a way that the light isnt being shown through it at its maximum effect. when I try any of the buttons on the front(other than power, which functions properly) it brings up a dialog on the screen saying at the top "video input" and then it says "Out of range" as the message. so I can't change brightness or anything. any ideas? I can also make out my desktop, so I know it is -working- just not correctly. and the screen goes into standby if you unplug the video cable, so power seems to work right. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
NEC Multisync 95F monitor | Electronics Repair | |||
NEC Multisync 95 - Where to get parts? | Electronics Repair | |||
NEC Multisync 77F | Electronics Repair | |||
NEC Multisync 1810 LCD | Electronics Repair | |||
NEC multisync LCD 1810 | Electronics Repair |