Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Samsung HP-4363W - Parting Out
After many fruitless hours of troubleshooting and replacing parts, I'm
throwing in the towel on this thing - I can't justify spending any more time or money on it. All the defective parts on the mainboard have been replaced but the convergence is still severely distorted. What's more I can't even save any convergence adjustments without the original remote, not that it matters since the convergence won't line up anyway. Whoever designed this thing should be taken out and shot..... Anyway, the customer doesn't want the set back and I don't have room to store it, so I'm going to strip it down. If anyone wants the CRT's or other parts, please let me know. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Trepanning and Parting Off | Metalworking | |||
Samsung part BN41-00001A for Samsung 520TFT Syncmaster monitor | Electronics Repair | |||
Chatter while parting off. | Metalworking | |||
Parting off | Metalworking | |||
Parting (toolsteel?) | Metalworking |