Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Sanyo model #DP42647 no video
This is my first flat panel LCD to work on, and need a little help. I
am not a pro, but have been working on tube TV's for a few years now. This set has no video or on screen display. Audio is fine. The screen also pulses at power up for a few seconds then stops, only to leave a blank dark blue screen. I have googled and only found it could be the sustain and driver boards at fault, and replacement is the fix. I suspect component replacement would do the job, just not sure where to start, especially with no schematic. Anyone here worked on this particular set or can get me started in the right direction? The lack of on screen display suggests? Any help will be greatly appreciated. Thanks as always group. |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Sanyo model #DP42647 no video
|
#3
Posted to sci.electronics.repair
|
|||
|
|||
Sanyo model #DP42647 no video
|
#4
Posted to sci.electronics.repair
|
|||
|
|||
Sanyo model #DP42647 no video
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sanyo Model Ds25330 | Electronics Repair | |||
Sanyo Model DS25330 | Electronics Repair | |||
Sanyo Video Output IC VPH06 VPH07 VPJ07 | Electronics Repair | |||
Sanyo Video output IC | Electronics Repair | |||
Sanyo TV Model DS1930 Problem | Electronics Repair |