Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Belton springline reverb repair
Dropped cab , a source for a lost ferrite cylinder ? IF transformer core
drilled through ? or something used in a more audio range, I cannot think of anything suitable Is the metal connecting the end of the spring to the glue point at the end of the yellow plastic cylinder mount? other than strong enough to take normal knocks, presumably not copper, I could use tungsten or ni-chrome is the smallest diameter the best assuming strength is adequate or is it rigidity o flexibility that is the criterion in less camping of response. -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stumped on home repair of GFCI circuit all dead after light repair | Home Repair | |||
Stumped on home repair of GFCI circuit all dead after light repair | Home Ownership | |||
Fender AB763 Super Reverb, 1966 | Electronics Repair | |||
Belton springline reverb | Electronics Repair | |||
Seeknig schematic or service manual for MICMIX 305XL Studio Reverb unit | Electronics Repair |