 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Help with TDS2CM repair (TDS210)
Can anyone help with repair info for this comm module for a TDS210. I
found info that it can be upgraded to a TDS2MM with the correct firmware and memory increase which could be interesting. But right now the board will not allow the scope to boot completely so something is wrong. It did boot a few times but could never comm with the serial port connected. Looking for file tds2mm.hex (firmware for TDS2MM module) Looking for ideas of what to check Looking for schematics, or pictures or any help to troubleshoot board. Even pinout for expansion connector on the TDS210 scope would be helpful. Thanks in advance Eric |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Stumped on home repair of GFCI circuit all dead after light repair | Home Repair | |||
| Stumped on home repair of GFCI circuit all dead after light repair | Home Ownership | |||
| Tektronix TDS210 | Electronics Repair | |||
| Kenwood KA-5700 - Please help me repair / Hobby Repair / Blows Fuses | Electronics Repair | |||
| Gouged on repair part by appliance repair company? | Home Repair | |||
Hybrid Mode
