Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#11
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
In article ,
Jeff Liebermann wrote: Yup, but the long-term average will be pretty good -- gain a little in the daytime, lose a bit at night (or the other way around; could be either one depending on how the circuit was set up). Maybe, if the wearer maintains a regular schedule. That's a fair assumption, until the wearer changes their usage pattern, such as going on a ski trip. Also, please note that the original discussion was over the accuracy of a computah clock, not a wrist watch. Unless left on continuously, computers don't maintain a set schedule. Even so, their internal temperature is affected by the building environment. But is there any real difference between a 'quartz' watch and a PC clock? They both rely on a low cost crystal? -- *A journey of a thousand sites begins with a single click * Dave Plowman London SW To e-mail, change noise into sound. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
First Clock | Woodworking | |||
you've got to see this clock | Woodworking | |||
CLOCK | Woodworking |