when smd chip board contacts get loose is it better using the regular
soldering iron to touch/press on chip leg at point where it comes
out of chip package or down at the board contact?tnx

poster wrote in message
...
when smd chip board contacts get loose is it better using the regular
soldering iron to touch/press on chip leg at point where it comes
out of chip package or down at the board contact?tnx


Where the main thermal mass is, point of soldering iron at the junction of
pin and trace. If, like me, you rarely do SMD soldering and cannot justify
obtaining solder paste or sub-millimetre solder. If you have some way of
rolling , roll down 1mm solder to thin strip and slice down with a razor for
short lengths of sub-mm.

For SMD de-soldering , on the cheap, on my tips files below

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

poster wrote:
when smd chip board contacts get loose is it better using the regular
soldering iron to touch/press on chip leg at point where it comes
out of chip package or down at the board contact?tnx

The latter.


--
W
. | ,. w , "Some people are alive only because
\|/ \|/ it is illegal to kill them." Perna condita delenda est
---^----^---------------------------------------------------------------