Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 17
Default Baygen (Freeplay) Schematic?

Hi, I have one of the clockwork/solar Baygens (AM-FM) in the clear
case. Something has happened to the FM tuner such that most of the
88-90 MHz band has disappeared, although the AM band is still right
on. Mostly I listen to non-commercial radio when I'm working outside,
so this has been a hardship. I'd bet I could figure out how to fix it
after spending a few minutes (hours) staring at the schematic, but, so
far google has not been my friend.

Does anyone have a schematic for this or any other clockwork model?

Alternatively, does anyone have insight into the cause of this
problem? My gut feel is a little cap must be shorted or opened.

Thanks in advance.
  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 5,247
Default Baygen (Freeplay) Schematic?

wrote in message
...
Hi, I have one of the clockwork/solar Baygens (AM-FM) in the clear
case. Something has happened to the FM tuner such that most of the
88-90 MHz band has disappeared, although the AM band is still right
on. Mostly I listen to non-commercial radio when I'm working outside,
so this has been a hardship. I'd bet I could figure out how to fix it
after spending a few minutes (hours) staring at the schematic, but, so
far google has not been my friend.

Does anyone have a schematic for this or any other clockwork model?

Alternatively, does anyone have insight into the cause of this
problem? My gut feel is a little cap must be shorted or opened.

Thanks in advance.



I seem to remember coming across one where something caught inside the vanes
of the tuning cap and all the polyester sheets got graunched up.

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Here are schematic Junker gas-burning heating installation. [1/1] - "Junker gas burning schematic.zip" yEnc (1/4) johan[_2_] Electronic Schematics 3 September 26th 07 07:01 PM
Req: Need schematic or source to get a schematic for a Bryant 588 gaspack Home Repair 0 October 17th 06 01:16 AM
Looking for a schematic stan Electronics Repair 0 January 21st 05 07:36 PM
Looking for Schematic stan Electronics 0 January 17th 05 07:21 PM
Low end mills - backlash/freeplay Paul Farber Metalworking 4 March 15th 04 08:56 AM


All times are GMT +1. The time now is 01:52 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"