Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Capacitor Testing.
I currently have a LCD projector in which I believe the convergence circutry
is messing up. Since this unit has quite a few electrolytic caps in it, I think theres a good possiblilty that there could be a few that are bad. Unfortunately my ESR metere is 2,000 miles away. Ive considered buying another meter since it would be nice to have, but is there any good way to check these things without a meter? I have a DMM and a soldering iorn here. thats about it. They are all small SMD caps which fortunately I think I can get locally here.. I could probably replace all of the caps cheapr than buying another meter, but that is a pain. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
capacitor | Home Repair | |||
Capacitor value | Electronics Repair | |||
Capacitor Start, Capacitor Run Motor | Electronics Repair | |||
Capacitor Value | Electronics Repair | |||
Laws requiring portable appliance testing and electrical installation testing if any? | UK diy |