Capacitor Testing.
 

I currently have a LCD projector in which I believe the convergence circutry
is messing up. Since this unit has quite a few electrolytic caps in it, I
think theres a good possiblilty that there could be a few that are bad.
Unfortunately my ESR metere is 2,000 miles away. Ive considered buying
another meter since it would be nice to have, but is there any good way to
check these things without a meter? I have a DMM and a soldering iorn here.
thats about it. They are all small SMD caps which fortunately I think I can
get locally here.. I could probably replace all of the caps cheapr than
buying another meter, but that is a pain.

Capacitor Testing.
 

In article , "Michael Kennedy" wrote:
I currently have a LCD projector in which I believe the convergence circutry
is messing up. Since this unit has quite a few electrolytic caps in it, I
think theres a good possiblilty that there could be a few that are bad.
Unfortunately my ESR metere is 2,000 miles away. Ive considered buying
another meter since it would be nice to have, but is there any good way to
check these things without a meter? I have a DMM and a soldering iorn here.
thats about it. They are all small SMD caps which fortunately I think I can
get locally here.. I could probably replace all of the caps cheapr than
buying another meter, but that is a pain.

I would think you some kind of signal generator aside from ststic tests.
I get better reading from an analog meter on charging caps.

greg

Capacitor Testing.
 

"Michael Kennedy" wrote in message
...
I currently have a LCD projector in which I believe the convergence
circutry is messing up. Since this unit has quite a few electrolytic caps
in it, I think theres a good possiblilty that there could be a few that are
bad. Unfortunately my ESR metere is 2,000 miles away. Ive considered
buying another meter since it would be nice to have, but is there any good
way to check these things without a meter? I have a DMM and a soldering
iorn here. thats about it. They are all small SMD caps which fortunately I
think I can get locally here.. I could probably replace all of the caps
cheapr than buying another meter, but that is a pain.

DMM set to AC volts. Measure both sides of the capacitor with the projector
on. In a good capacitor, the voltage will be the same or close.

Yes, I know, that is crude but sometimes effective.

Capacitor Testing.
 

Michael Kennedy wrote:

Unfortunately my ESR metere is 2,000 miles away.

See http://www.anatekcorp.com/ttg/tiptrick.htm#Scope%20ESR
and find "Scope ESR - submitted by Michael Mayerhofer" on
the page.

Or
http://octopus.freeyellow.com/esr.html
ESR Testing

Or
http://octopus.freeyellow.com/99.html
99 Cent ESR Test Adapter

Regards,
H.

Capacitor Testing.
 

"Heinz Schmitz" wrote in message
...
Michael Kennedy wrote:

Unfortunately my ESR metere is 2,000 miles away.

See http://www.anatekcorp.com/ttg/tiptrick.htm#Scope%20ESR
and find "Scope ESR - submitted by Michael Mayerhofer" on
the page.

Or
http://octopus.freeyellow.com/esr.html
ESR Testing

Or
http://octopus.freeyellow.com/99.html
99 Cent ESR Test Adapter

Regards,
H.



Thanks for the suggestions everyone! I didn't know about these tricks.

Mike

Capacitor Testing.
 

In article , "Michael Kennedy" wrote:

"Heinz Schmitz" wrote in message
.. .
Michael Kennedy wrote:

Unfortunately my ESR metere is 2,000 miles away.

See http://www.anatekcorp.com/ttg/tiptrick.htm#Scope%20ESR
and find "Scope ESR - submitted by Michael Mayerhofer" on
the page.

Or
http://octopus.freeyellow.com/esr.html
ESR Testing

Or
http://octopus.freeyellow.com/99.html
99 Cent ESR Test Adapter

Regards,
H.



Thanks for the suggestions everyone! I didn't know about these tricks.


I think you could also use just a meter instead of oscilloscope.

greg