Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Toshiba 61H70 - power failure
I have a rear projection TV that I bought from a friend. The initial
problem was a lack of convergence. During attempts to adjust the convergence and restore factory settings , an accidental memory restore occurred. The TV immediately went out (after a click that sounded like a relay). The TV turns back on, but fails within a few seconds, leaving the LED flashing. I have replaced the ICs and QA02, but the problem was not corrected. The fuse is not blown. Any advice on what to do next is greatly appreciated. Part numbers are even more helpful. -- Gary |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
HP/Agilent E3632A programmable power supply has power up failure (solution) | Electronics Repair | |||
Worcester 280 Power Failure | UK diy | |||
Toshiba TP50F60 Failure | Electronics Repair | |||
Toshiba 61H70 61HX70 Rear Projection CRTs won't turn on | Electronics Repair | |||
pc power supply failure? | Electronics Repair |