on 1978 AD6900 cassette decks.
Anyone been inside the sockets?
http://home.graffiti.net/diverse:gra...wa_sockets.jpg
The barrel on the second from left loose. Cut away the black plastic and
shows a deep recessed ring on the barrel that the plastic ring must force
into and hold the barrel in place.
Via the gap in the mounting plate it is possible to see inside and the
silvery protruding barrel is swaged out , rivet fashion , under the backing
plate and earth tag, so must be assembled/swaged from inside the socket
before the contacts are placed inside . Innards not removed as requires
desoldering a number of wires , cleaning off all solder and pulling the
pierced rear paxolin sheet. Anyone know how the contacts are fitted inside,
for any future revisit to these awkward sockets.
Patching up again, matter of twisting wire into this recess to tension up, a
ring cut from a piece of power cord gland plastic, fitted over and glued in
place, bodge covered by the front panel that goes over these 4 sockets.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/