Hello,
I have two ipaq with a failure.
The first one cannot recognize neither a CF card nor a SD card. I
suspect the supply to be dead.
The second one had a issue with the touchscreen and a reboot issue.
I try a lot of solution, for instance poweroff software but nothing can
solve the issue. The only way to shutdown is to take the battery away.
I also notice that the intern battery cell becomes discharging.
Did anybody already have this issue ? What are the solutions in both
cases ?

Thanks

--
Cordialement, Groeten, With Kind Regards

On Tue, 11 Nov 2008 18:08:45 +0100, alpibucky wrote:

I have two ipaq with a failure.
The first one cannot recognize neither a CF card nor a SD card. I
suspect the supply to be dead.
The second one had a issue with the touchscreen and a reboot issue.
I try a lot of solution, for instance poweroff software but nothing can
solve the issue. The only way to shutdown is to take the battery away.
I also notice that the intern battery cell becomes discharging.
Did anybody already have this issue ? What are the solutions in both
cases ?

I don't have any specific solutions. I have 3 assorted ipaq units
sitting in the office that can't be repaired. All have different
problems, but a common cause. Intermittent cicruit board traces and
possibly ball grid array (BGA) soldering problems. I've had no luck
fixing either cause.

You might try a commercial repair service:
http://www.ppctechs.com/HP-Compaq-iPAQ-h2210_115/repairs/Full-Service-Repairs.htm

--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558