Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
Working order but an intrusive mains buzz on the clean channel, not the same
as stray mains pick up, its like picture on sound buzz on a TV. Buzz at most on minimum of gain pot and least on maximum. No effect on buzz , altering the other pots. Valves check out on tester fine, no change in buzz swapping them around. No problems on any switches, pots or sockets. Soldering looks fine, No noise on the HT line. This preamp must have been used in heavy rain, or something like , with the previous owner. Had to drill out one of the casing screws to get inside. Present owner has not had problems for the couple of years in his hands. -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Peavey XR 886, 1997, mixer amp | Electronics Repair | |||
Red White and Boogie set. | Woodworking Plans and Photos | |||
Handyman Boogie | UK diy | |||
1997 Phillips Magnavox | Electronics Repair | |||
join thin twin electricity cable with standard twin and earth | UK diy |