Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
"ghost" image on Hitachi LCD projector
Does anyone know how to get into the service menu of a Hitachi CP-X430W? It has
a faint double image, apparently in the red channel, and the optical alignment is correct. The cyan leading ghost image shows up on all screens including OSD menus. I've seen similar but correctable ghosting problems in other projectors. Older Sanyo models like the PLC-9000 and other makes such as Boxlight 9600, Eiki LC-X1 and Proxima 9310 made by Sanyo were "repairable" by getting into the service menu and changing one data value. I'd hate to toss this Hitachi for such a fault if it's repairable in that manner. It's out of warranty and Hitachi doesn't want to talk to me. Ray Carlsen A/V Engineering University of Washington, Seattle -- My return addy is spamblocked. To reply, remove the zeroes. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Photocopier negative "ghost" image | Electronics Repair | |||
Panasonic 28in television "afterglow" image | Electronics Repair | |||
Yellow/bluw "ghost" in SONY 53'' XBR45 (rear projection unit) | Electronics Repair |