Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Posted to alt.energy.homepower,alt.engineering.electrical,sci.electronics.repair
external usenet poster
 
Posts: 22
Default 280V motor on 230V circuit


? "James Sweet" ?????? ??? ??????
news:HKnVj.128$6D1.49@trndny02...



The central air kicks on without my lights dimming, and I am in North
Central Florica.


Mine dim slightly for an instant when my 3 ton heat pump kicks in, it's
only noticeable with the few incandescent lights left in the house though.
The LRA on that thing is something like 90A. I think most of the drop must
be in the 50' or so of 2/0 AL wire between the meter base and the
transformer though as they don't seem to dim at all from any of the
neighbors.

That's because you have no bloody wind-turbines on your grid. We have here,
and I had to include them in my thesis, and these things seriously harm the
voltage quality in interconnected grids. In stand-alone residence
installations, they work ok, probably with photovoltaics, but here they are
a disaster, in whole Crete all the lights flicker every evening when the
bloody wing stalls them and they convert momentarily from generating to
motors. I prefer old-fashioned fossil-fuel fired power plants, after all
smoking chimneys is a token of peace:-)



--
Tzortzakakis Dimitrios
major in electrical engineering
mechanized infantry reservist
hordad AT otenet DOT gr


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Electric motor/circuit question BCDrums Home Repair 20 February 7th 07 05:01 AM
208-230V Single Phase Motor wiring [email protected] Metalworking 4 February 20th 06 10:28 PM
How big of a circuit for a 7.5 hp motor? Greg Deputy Metalworking 5 March 3rd 05 02:23 AM
Wire and Circuit Size for 230V Shop Tools . Woodworking 7 November 8th 04 04:40 PM
Converting JWTS-10CW2 to 230V and circuit wiring.. Subw00er Woodworking 14 January 2nd 04 09:46 PM


All times are GMT +1. The time now is 01:34 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"