Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
RCA projection TV Problem
My RCA rear projection TV has worked well after help from you TV
service people in January, 2005. It has a chassis number of PTK195AC and is model P60812BL At that time I found that the surface of the PC boards had some of the coolent and other debris which I cleaned and that fixed the problem. Coming home from vacation today, the main fuse from the AC input failed. Upon replacing it, the convergence is all messed up. I went into the service mode using the front panel as the service manual describes, I can't seem to get the grid pattern that I got back in 2005. Can anyone tell me 1. What typically goes wrong when the main fuse blows and the picture goes out of adjustment 2. How do you get into the built-in geometric alignment grid pattern? I am into the service mode, but it does not seem to have any pattern except the Pfor parameter) and V (for parameter value): on the screen. I would like to nurse this TV along for a while. It has given good service and I have no reason to replace it other than the present problem. I really don't want to get into it deeply. For example, I would prefer NOT to get a chipper checker or have to hook an oscilloscope to it. sci.electronics.repair |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Problem with my projection LCD | Electronics Repair | |||
projection tv problem | Electronics Repair | |||
Mitsubishi projection problem | Electronics Repair | |||
Projection TV Problem? | Electronics | |||
Magnavox projection TV problem | Electronics Repair |