A forgery, using my name.

-------- Original Message --------
Xref: sn-us sci.electronics.repair:472775
Path:
sn-us!sn-feed-sjc-01!sn-xt-sjc-10!sn-xt-sjc-07!sn-xt-sjc-13!supernews.com!grolier!club-internet.fr!feedme-small.clubint.net!aioe.org!not-for-mail
From: "Michael A. Terrell"
Newsgroups: sci.electronics.repair
Subject: tuner has "noisy" tuning at bottom end of FM dial
Date: Sun, 24 Feb 2008 20:33:58 -0800
Organization:
Lines: 23
Message-ID:
References:


NNTP-Posting-Host: 8zupbN1cP7p1Dd5suoduXg.user.aioe.org
Mime-Version: 1.0
Content-Type: text/plain;charset="iso-8859-1"
Content-Transfer-Encoding: base64
X-Complaints-To:
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-Priority: 3
X-MSMail-Priority: Normal


"Baron" wrote in message
...
Scott Kelley wrote:


I have a Kenwood KT815 tuner - pretty decent 5 gang tuner... At the
bottom end of the tuning dial it is very difficult to tune -
inconsistant tuning, does not smoothly transition through the tuning
range, but rather jumps around, then does not necessarily stay tuned
in to that frequency well. These problems do not occur at the top end
of the dial.

I have cleaned the tuning capacitor on 3 different occassions using
various methods, including compressed air, circuit board cleaner, and
a combination of both. Every time I clean it, it works great for
awhile, then goes back to acting badly again.

Any thoughts about this? I suspect there have been previous posts on
the issue, but I didn't find anything...

Thx
Scott Kelley

After you have cleaned it a spot of Vaseline on the wipers will keep it
that way for a lot longer. I use an old ink refill syringe and needle.
You have to give it a good squeeze but it puts lube right where you
want it!
--
Best Regards:
Baron.



You got no brain!