Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1
Default Samsung SV-5000W question

Grateful for any help on this one. Tried posting on alt.video.vcr and was
referred here. I guess I'm pinning my hopes on some 'magic' keystroke
combo on the remote that will force the SV-5000W into set-up mode.

I bought a SV-5000W when I was working in the USA some years ago and had
no setup or usage issues with it then. Having returned to the UK I'm now
in a position to try and use it here but it won't display a setup screen
for another 'first installation' on power up. I can get an OSD menu when
a tape is playing but rather suspiciously it will not allow entry to the
'installation' sub-menu (all other menu options are fully open) so I can
tune in to my cable box to allow TV recording (playback is fine). I
suspect Samsung have hard-wired these things to allow only one 'power-on
set-up'. Pity, as I found it quite a good piece of kit but it's only
partially useful just now.

Has anyone else any similar experience with this kit and found a
workaround?

Cheers
S.
  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 201
Default Samsung SV-5000W question


You will get your best results by contacting Samsung directly. There
is probably a simple setting to get the mode you need to have to do
the set-up.


Jerry G.
======





On Feb 5, 12:19*pm, Chalky wrote:
Grateful for any help on this one. Tried posting on alt.video.vcr and was
referred here. *I guess I'm pinning my hopes on some 'magic' keystroke
combo on the remote that will force the SV-5000W into set-up mode.

I bought a SV-5000W when I was working in the USA some years ago and had
no setup or usage issues with it then. *Having returned to the UK I'm now
in a position to try and use it here but it won't display a setup screen
for another 'first installation' on power up. I can get an OSD menu when
a tape is playing but rather suspiciously it will not allow entry to the
'installation' sub-menu (all other menu options are fully open) so I can
tune in to my cable box to allow TV recording (playback is fine). *I
suspect Samsung have hard-wired these things to allow only one 'power-on
set-up'. Pity, as I found it quite a good piece of kit but it's only
partially useful just now.

Has anyone else any similar experience with this kit and found a
workaround?

Cheers
S.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Samsung part BN41-00001A for Samsung 520TFT Syncmaster monitor [email protected] Electronics Repair 1 February 5th 08 05:01 PM
Samsung SV-5000w world vcr Michael Electronics Repair 4 September 30th 06 03:54 PM
Samsung, anyone? [email protected] Electronics Repair 0 November 14th 05 06:12 AM
Samsung DVD question Paul Electronics Repair 4 April 19th 04 06:06 PM
Samsung coolant question Gurkle Electronics Repair 0 August 1st 03 07:50 PM


All times are GMT +1. The time now is 02:24 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"