Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
SUN COBALT QUBE 3 - power supply feed pinouts needed
need pinouts for qube 3 - unit needs 5, 12, and -12v power
I am unable to identify the supply lines.. I do know the grounds. Known: the unit needs +5, +12, and -12 volts unknown: which terminals on the 8 pin din connector is the 12, 5, and -12. USE: this number layout http://freespace.virgin.net/tom.baldwin/DIN8-pinout.gif I know pins 7,5,4 are connected to ground (chassis) if someone here with a qube 3 could measure the pins it would be greatly appreciated. SEARCHED the web for this NO INFO anywhere to be found. why couldnt the manufacturer supplied this fundamental info in their user manuals . post results here or at http://www.cobaltuserforums.com/viewtopic.php?t=567 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Power Supply needed | Electronic Schematics | |||
JVC VHS hrs5500 power supply help needed | Electronics Repair | |||
power supply zener value needed | Electronics Repair | |||
well-setting power feed info / parts needed | Metalworking | |||
B`port power feed gear box part needed???? | Metalworking |