 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
B`port power feed gear box part needed????
I ordered some new bearings for the gear box, but discovered another
problem. The "gear sleeve" shaft ( # F-58 on the Power Feed Attachment drawing 10 )needs to be replaced. Somebody has had their hands in there before. The 1.5 dia. collar is bent and cracked. I would like to replace it, does anyone know where I could get one? I could fix it with some TIG welding and lathe work if I had to go that route. Any help would be appreciated. Thanks, Craig |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| power flushing | UK diy | |||
| Help Installing Align Power Feed on Bridgeport Please? | Metalworking | |||
| Phase converter balancing | Metalworking | |||
| correct name of door-closing part needed | UK diy | |||
Linear Mode
