Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Tesoro Tejon metal detector , search coil
One of those jobs I now wish I hadn't taken on.
Intermittant problem with angle of the search coil, cable sheath cracked at the entry point to the search coil housing , so assumed broken wire within. No, now having Dremmel plus ball-mill excavated down through the epoxy, the copper wire of the search coil going to the green wire exposed and the same for the red, continuity to the multistrand wires from each of those. But no continuity between the exposed copper wires, even with an RLC meter , just in case a C in there. Any ideas where the break is likely to be or how to zero in ? 500 GBP cost so worth spending some more time on it -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stud and metal detector that works | UK diy | |||
METAL DETECTOR | Woodworking | |||
Metal detector search | Woodworking | |||
METAL DETECTOR | Woodworking | |||
Laser Scout , Metal detector | Electronics Repair |