One of those jobs I now wish I hadn't taken on.
Intermittant problem with angle of the search coil, cable sheath cracked at
the entry point to the search coil housing , so assumed broken wire within.
No, now having Dremmel plus ball-mill excavated down through the epoxy, the
copper wire of the search coil going to the green wire exposed and the same
for the red, continuity to the multistrand wires from each of those.
But no continuity between the exposed copper wires, even with an RLC meter ,
just in case a C in there.
Any ideas where the break is likely to be or how to zero in ?
500 GBP cost so worth spending some more time on it

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/