Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Need Help[ with by Projection Set - 50" Mitsubishi
I usually post on the arcade group but I was told the projection
experts are here. ----------------------------------------------------------------------------------------------------------- I have a Sega Gunblade Video Game with a 50" Mitsubishi Projection TV. The model # is VS-50SE1 which Mitsubishi does not recognize. Sega bought these sets and modified them with cooling fans and a seperate input for the video from the game. No one has been able to find a manual for that model. There is no chassis # to cross reference it. Other arcade people think the model is a VS-5043 which was also made in 1996. If you have a manual for either odel or know where I can download it, please let me know,. The set come on for about 5 seconds and I hear high voltage kick in and them the relay kick the set off. Since I can't find a manual as of yet, I am thinking the B+ is too high and it is shutting down. I was going to disconnect the B+ from the flyback to see if it come on. I also thinking about changing the HOT and VR to see if that wil do it. Any common problems that I need to check? Any help or advice will be appreciated Kajunlion |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Need Help[ with by Projection Set - 50" Mitsubishi
Update -
I have ruled out the power supply section & Horz output becuase the set does fire up and then shuts down. This tells me it is working but the set is sensing either too much voltage or current. I thought the problem might be the vert output IC and I changed it and no luck. The guy who is helping me told me that it might be one of the 3 convergence IC's that is bad. He says that usually when a projection set shuts down, it is either a convergence or verticle problem. Any help will be appreciated Thanks Kajunlion |
#4
Posted to sci.electronics.repair
|
|||
|
|||
Need Help[ with by Projection Set - 50" Mitsubishi
I will chech it out and post it here.
Thanks Kajunlion |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
50" Mitsubishi Projection TV - Shutdown - I need a Manual if it exist? | Electronics Repair | |||
Mitsubishi 46" Projection TV powers on but no picture | Electronics Repair | |||
50" Mitsubishi Rear Projection Help | Electronics Repair | |||
Mitsubishi Projection TV Won't Power Up | Electronics Repair | |||
Mitsubishi Projection TV | Electronics Repair |