Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 6
Default Sony KV-35V45 CRT Short, i'm clueless now..

Hi Folks. I'm posting here as a last resort, i've spent more time on
this tv it ever worths, but money isn't the point more that i wouldn't
give up. I hate spending time on something and give up on it at the
end argh.

Ok here's my issue, i have a 1996 Sony KV-35V45 CRT, some friend gave
it to me. At first, tv was Greenish and flashing on and off. Also,
when set on tuner, image was kinda pinkish instead of white and black.
So i read a bit online, and it seems i've got a green Cathode (KG) to
Heater short.

After checking the voltages, i've found the KG signal on the crt neck
jumped from 109 to 209V. The other ones were stable. Some guy on
another forum tells me, that it's KG to K shorted.

First thing ive tried, after reading, was to tap on the crt neck. It
worked a few times.. for max an hour. Sometime i tapped on it a few
times, had a nice spark, image got clean and nice... But it never
lasted.

So i went and found a CRT rejuvenator, made myself an unversal adapter
for it with the proper signals. It's a B&K model 467 rejuvenator. It
was unable to clear the short on it. But after giving it a shot, the
TV was much better, having a black background instead of the greenish
one i've used to have. For a few minutes.. a spark occured in the CRT
neck again, and back to square one.

So then i read that if i put the tv on it's front and tap on the neck
with CRT board removed, i can clear the particles out and that might
do it. Did that, and now the TV wont get outta standby, and i don't
see the heater glowing up (?) anymore, even with CRT rejuvenator
hooked up. It's like knocking on the CRT neck pushed the short even
worst..

Even the 'restore' more of the rejuvenator wont show any activity when
i push on any of the 3 color guns button. It used to do before i did
the tap on the neck thing.

If anyone could clearly tell me what happened, and if i can do
something, i'd really appreciate it. Else, i'm giving that tv a trip
to the dumpster, but i'd seriously hate to. I have no tv repair
experience, i'm learning with that one (ok i'm a little late, but i
guess it'd serve me for something else someday).

Thanks in advance, Vincent.

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lathe book for the utterly clueless Dhakala Woodworking 13 March 21st 06 05:28 PM
Adiabatic short-circuit compliance on very short short-circuits Will Dean UK diy 17 August 23rd 05 12:03 PM
Sony KV-35v65 hv short Electronics Repair 1 January 19th 05 09:00 AM
Clueless about Flueless Hammer Chewer UK diy 6 December 20th 03 12:47 PM
Re-Posted Clueless about Flueless Hammer Chewer UK diy 3 December 19th 03 08:24 PM


All times are GMT +1. The time now is 11:09 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"