Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Posted to sci.electronics.design,sci.electronics.repair
external usenet poster
 
Posts: 2,770
Default So what's the truth about lead-free solder ?



Spurious Response wrote:

Eeyore wrote:
Spurious Response wrote:
Eeyore wrote:
Spurious Response wrote:

What is nice about digital broadcasts is that when you have the signal, you
have it all. No snow,
No herringbone patterns. Crisp and clean, with no caffeine.

Except when it breaks up.


Nope. If you tune the signal, you get ALL of the data. You must exceed
more than ten percent bit error rate for a dropout to occur, and it is
bit error rate that matters most for a "tuned" channel.


I have a cable TV set top box. There's no tuning involved. It still breaks up
occasionally.


IT tunes itself, dip****.


Which part of " There's no tuning involved " didn't you understand ?

You press a button, it gives you the channel. Of course I know it does any internal
tuning required in firmware.

Graham

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yet more on lead-free solder n cook Electronics Repair 11 August 12th 07 03:12 AM
lead free solder with voc free water base bick Electronics Repair 11 May 17th 07 04:56 PM
lead free solder [email protected] Electronics Repair 11 September 2nd 06 06:36 PM
Lead-Free vs. 63/37 tin/lead solder [email protected] Electronics Repair 28 June 17th 06 12:29 PM
Lead Free solder Michael Chare UK diy 38 March 4th 06 04:56 PM


All times are GMT +1. The time now is 01:40 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"