Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Samsung projection service menu
Samsung 42" rear projection TV. Model # HC-P4252WX/XAC chassis # P59A.
Replaced bad convergence IC's STK-392-010, & two 3.9 ohm fusible resistors. Unit works ok, & auto focus works ok, but how do you "tweak" the convergence? The mute, 182, power won't get into service menu. How do I get in? These IC's get quite hot. Anyone install colling fans in thse type sets? Thanks, Dani. |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Samsung projection service menu
it's Mute, 1-8-3 (with the set already on)
"Dani" wrote in message ps.com... Samsung 42" rear projection TV. Model # HC-P4252WX/XAC chassis # P59A. Replaced bad convergence IC's STK-392-010, & two 3.9 ohm fusible resistors. Unit works ok, & auto focus works ok, but how do you "tweak" the convergence? The mute, 182, power won't get into service menu. How do I get in? These IC's get quite hot. Anyone install colling fans in thse type sets? Thanks, Dani. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Samsung service menu problem | Electronics Repair | |||
Samsung Projection T.V. | Electronics Repair | |||
samsung sp403jha or pl403 sercive menu | Electronics Repair | |||
Samsung SyncMaster 213T service menu | Electronics Repair | |||
Pioneer SD-P55A3-K Projection Bowed sides & Service Menu Access | Electronics Repair |