 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
JVC & Sears TV's no sound.
JVC Model # AV-27820 Chassis # A 53, or Sears (made by JVC) Model #
57-14367. This (no sound) issue sometimes happens after doing the typical vertical repair, or after replacing the tuner, that was damaged. No sound, & no way to turn on sound in menu. Has anyone seen this? It's getting common for me, but I never get it solved. There is gain from the audio output ic. Seems like an EEPROM, or Micro issue! Thanks, Dani. |
|
#2
Posted to sci.electronics.repair
|
|||
|
|||
|
JVC & Sears TV's no sound.
On Feb 21, 11:48 am, "Dani" wrote:
JVC Model # AV-27820 Chassis # A 53, or Sears (made by JVC) Model # 57-14367. This (no sound) issue sometimes happens after doing the typical vertical repair, or after replacing the tuner, that was damaged. No sound, & no way to turn on sound in menu. Has anyone seen this? It's getting common for me, but I never get it solved. There is gain from the audio output ic. Seems like an EEPROM, or Micro issue! Thanks, Dani. I had an RCA with this problem once,,,there is a speaker MUTE signal for sets with an audio output, but if your version doesn't have an audio output there is no screen setting to change this, if it gets accidently set to mute. There may be a way in the service mode. What I did was just disconnect the mute line from the audio path. The only downside to this is the speaker pops on turn on and turn off, but its not too bad. |
|
#3
Posted to sci.electronics.repair
|
|||
|
|||
|
JVC & Sears TV's no sound.
On Feb 23, 12:46 pm, "Mark" wrote:
On Feb 21, 11:48 am, "Dani" wrote: JVC Model # AV-27820 Chassis # A 53, or Sears (made by JVC) Model # 57-14367. This (no sound) issue sometimes happens after doing the typical vertical repair, or after replacing the tuner, that was damaged. No sound, & no way to turn on sound in menu. Has anyone seen this? It's getting common for me, but I never get it solved. There is gain from the audio output ic. Seems like an EEPROM, or Micro issue! Thanks, Dani. I had an RCA with this problem once,,,there is a speaker MUTE signal for sets with an audio output, but if your version doesn't have an audio output there is no screen setting to change this, if it gets accidently set to mute. There may be a way in the service mode. What I did was just disconnect the mute line from the audio path. The only downside to this is the speaker pops on turn on and turn off, but its not too bad. Did you check for bad filter caps in the amps & output |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Sears (made by JVC) T.V. no sound. | Electronics Repair | |||
| No sound from TV & No sound menu (Aiwa TV model sx2150) | Electronics Repair | |||
| JVC / Sears 27" T.V. | Electronics Repair | |||
| Sears parts for JVC made T.V.'s. | Electronics Repair | |||
| Sears 25" T.V. (JVC) !! | Electronics Repair | |||
Linear Mode
