 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Fish Finder (depth-sounder) display problem.
Hi all,
I have a Fish-Finder with a 4" x 5" approx. LCD screen which has vertical stripes (no image) at various points across it.I am not very familiar with this technology, I know it has a (square waves?) drive and dedicated ic's for display.the housing was gas filled (not anymore).Would these missing bands be caused by bad contact 'tween the rubber connecting pads on the screen / pcb interface? shame really as the instrument works fine other than the display. Thank you for reading this. |
|
#2
Posted to sci.electronics.repair
|
|||
|
|||
|
Fish Finder (depth-sounder) display problem.
kontiki wrote in message . com... Hi all, I have a Fish-Finder with a 4" x 5" approx. LCD screen which has vertical stripes (no image) at various points across it.I am not very familiar with this technology, I know it has a (square waves?) drive and dedicated ic's for display.the housing was gas filled (not anymore).Would these missing bands be caused by bad contact 'tween the rubber connecting pads on the screen / pcb interface? shame really as the instrument works fine other than the display. Thank you for reading this. Very possible It's called a zebra connector Try cleaning the zebra and display contacts with alcohal. Do not handle the contact areas, they must remain clean. bg |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Dishwasher Depth Problem | UK diy | |||
| depth sounder transducer cable repair | Electronics Repair | |||
| Help with Display problem | Electronics Repair | |||
| supporting a new tile floor- plywood depth, backer board depth? | Home Repair | |||
| Problem with PC-7518 depth adjust lock | Woodworking | |||
Hybrid Mode
