Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
Model # F32665, Chassis # CTC 203CH3, at turn on, high voltage comes
right up, & the set shuts right down again, & sometimes tries to start 2, or 3 times, or will continue to start, & shut right down again. After much troubleshooting, I found the F2 PIP board (audio/video module) to be the problem. Unplug it, & the set works, but of course just with a blank raster, & won't switch from tuner to audio/video. The part is NLA at my usual suppliers, & will try to rebuild it. Has anyone seen this fault? I have seen it twice in the last year or so. Thanks for your input, Dani. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
2 "ground rod" questions (Thumper aka cable fault locator) | Home Repair | |||
Outcome (was 2 "ground rod" questions (Thumper aka cable fault locator)) | Home Repair | |||
Odd RCA 27" T.V. | Electronics Repair | |||
Odd "Metal can" transistors (but not TO-18, or similar) | Electronics | |||
Odd d-i-y PC fault | UK diy |