the projector had a bad lamp, and i replaced the lamp. it worked ok until
now. 30 hours later.

it turns on, shows a picture from the inputs, but the problem is when you
turn it on
the green LED blinks like i tnormally does, but 15 seconds later. the lamp
shuts off, fans kick on high speed, and the red light will blink on 1 second
intervals. almost like a bad lamp or something. lamp is new. i dunno whats
up.

i took the lamp out and stuck it my boxlight cage, works fine. :-\

any ideas?

i dont have the remote to do that :-\



"Meat Plow" wrote in message
news
On Sun, 04 Feb 2007 15:39:50 -0500, Mike Has Frothed:

the projector had a bad lamp, and i replaced the lamp. it worked ok until
now. 30 hours later.

it turns on, shows a picture from the inputs, but the problem is when you
turn it on
the green LED blinks like i tnormally does, but 15 seconds later. the
lamp
shuts off, fans kick on high speed, and the red light will blink on 1
second
intervals. almost like a bad lamp or something. lamp is new. i dunno
whats
up.

i took the lamp out and stuck it my boxlight cage, works fine. :-\

any ideas?

Reset the lamp timer?


--
Pierre Salinger Memorial Hook, Line & Sinker, June 2004

COOSN-266-06-25794