Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1
Default RCA D52W20 Limited to DVI Input

Hi,

I have an RCA D52W20 rear-projection HDTV monitor that was purchased
July 2005 (about 1.5 years old). This TV gets a lot of use, averaging
maybe 4-5 hours a day from three roommates. We have a number of
components connected to the box:

- Scientific Atlanta DVR connected via DVI cable + inline HDMI adapter
- A number of video game systems connected to one of the composite
inputs via an external switch box
- A DVD player connected to Component 1
- A Playstation 2 connected to Component 2
- We use a low-end Sony receiver set up for all audio, no audio goes
through the TV.

THE PROBLEM: We noticed about 3 months ago that on all inputs
*besides DVI*, after a few minutes of being on, the set would emit a
very high frequency "squeal" or "whine" for a few minutes, and while
it was doing so, would distort the screen by stretching horizontally
slightly. After a few minutes this would go away and the sound would
stop and the picture would go back to normal. At first, we just
attributed it to voltage spikes or something and never thought of it
because we almost always use the DVI input, and only occasionally will
watch a DVD on the weekends or something.

About 2 months ago, the problem became worse - we noticed that once
the squealing started, it would sometimes not stop for several hours.
Also, it appeared to be getting louder.

Now, the sound on any input besides DVI starts immediately, and is
horrifically loud. Obviously this renders those inputs useless until
it is repaired, and now we are concerned that this problem will
eventually effect the DVI input as well. We are also concerned that
whatever is causing this problem is probably also causing irreparable
damage to other parts of the TV.

TROUBLESHOOTING:
We already tried disconnecting all of the inputs from the TV and
testing each mode. The sound goes away for all inputs when nothing is
connected, but when an input is connected (say, the DVD player) and is
powered on, the sound immediately returns. We also replaced our surge
protector as a cautionary measure as well to no avail.

Any guesses as to where the problem might lie, so that a call to a
repairshop might be successful? Thanks in advance for any insight you
might be able to give.

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
RCA PTK195 Unusable signal on composite or s-video input Rejean Electronics Repair 1 November 28th 06 02:19 AM
RCA D52W20 fails to start Alex Tsiboulski Electronics Repair 14 April 17th 06 08:56 PM
DVI-D connectors and cables John Dundas Electronics 0 August 29th 04 11:34 PM
DVI input specification of Pioneer PDP504PE (The screen part of the Pioneer PDP504HDE) Art Electronics Repair 0 July 18th 04 03:48 AM
RCA D52W20 Always asks ENGLISH? When Turned on njbok Electronics Repair 4 June 18th 04 04:29 AM


All times are GMT +1. The time now is 11:19 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"