Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Zenith E44W46LCD Polarizers
I have one of these TVs that's starting to show signs of failure of
the blue and green polarizers. There is a slight lack of blue from most of the screen and there's a noticeable green cast to what should be black. I took apart the light engine to clean the dust out and I can see a slight burn on the blue polarizer. The green filter looks ok, but I find it hard to believe this set originally had such poor blacks (it's only 2.5 years old). Has anyone had any luck replacing the polarizers in LCD projectors like this? From what I've read, they aren't available from Zenith/LG. Has anyone found a source for new polarizing material that could be made to work? I assume the polarizers used in other types of LCDs such as overhead projector panels, or laptop displays wouldn't be able to take the heat. Has anyone tried it? Andy Cuffe |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Zenith TV | Electronics Repair | |||
Zenith TV | Electronics Repair | |||
zenith tv | Electronics Repair | |||
Zenith 35" T.V. !! | Electronics Repair | |||
Zenith 35" T.V.!! | Electronics Repair |