Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Safety for TV repair process?
I am thinking about repairing TV for my friend but I am afraid of high
voltage in TV systems. I understand the system and I am sure the problem is only with the power on switch or it would be the power control scheme of TV (it sometimes turned on but sometimes never wake up although the ac power is supplied and the switch is turned on!) Any suggestions? |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Safety for TV repair process?
Myauk ha escrito: I am thinking about repairing TV for my friend but I am afraid of high voltage in TV systems. I understand the system and I am sure the problem is only with the power on switch or it would be the power control scheme of TV (it sometimes turned on but sometimes never wake up although the ac power is supplied and the switch is turned on!) Any suggestions? judging from your lack of knowledge i'd suggest you keep out. this sounds like a power supply problem, where voltages lurk even after the set has been disconnected. take it to a reputable repair shop for a quote. -B |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Safety for TV repair process?
Myauk wrote:
I am thinking about repairing TV for my friend but I am afraid of high voltage in TV systems. lol, poor chap. The reservoir caps are more likely to kill that the EHT, though that can do. The solution is to discharge both. I understand the system and I am sure the problem is only with the power on switch or it would be the power control scheme of TV (it sometimes turned on but sometimes never wake up although the ac power is supplied and the switch is turned on!) Any suggestions? More likely to be a psu or horiz output output problem than a bad switch. NT |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Consumer Product Safety Comm. to discuss proposed SawStop technology safety rule | Woodworking | |||
I need your process pictures | UK diy | |||
I need your process pictures | Electronics Repair | |||
Did u know this process? | Metalworking | |||
A process of re-newel... | UK diy |