Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Panasonic PT-51DX80A STK low value resistors
R7048 R7049 R7050 R7051: ER0S2CKF10R0 10 ohms I think. Dani.
Meat Plow wrote: Screw Panasonic parts research. Called them three times and they won't call back. Anyone replaced these associated with the green convergence? R7048, 49, 50, 51 ? (near the four wire plug going to the green crt) They've all had the paint burned off but measure 98.5 ohms each. Something I've worked on in the past but I can't recall what says these should be 10 ohms? Only problem with the set is the green convergence is off by an inch or so so I thought I'd replace the STK devices and of course the resistors that were hot. |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Panasonic PT-51DX80A serviceman mode ?
Get the service manual. Negotiating the panasonic service mode is a PITA
without it. Leonard "Meat Plow" wrote in message news Help! -------------------------------------------------------------------------------- I am using the free version of SPAMfighter for private users. It has removed 20510 spam emails to date. Paying users do not have this message in their emails. Try SPAMfighter for free now! |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Panasonic PT-51DX80A serviceman mode ?
1.. Select SET-UP icon and select CABLE mode.
2.. Select TIMER icon and set SLEEP time for 30 Min. 3.. Press "ACTION" then VOL up to exit menus. 4.. Tune to the Channel 124. 5.. Adjust VOLUME to minimum (0). 6.. Press VOL ? (decrease) on receiver. Red "CHK" appears in upper corner. To toggle between aging and service modes: While the "CHK" is displayed on the left top corner of the CRT, pressing "ACTION" and "VOL" UP on the TV simultaneously will toggle between the modes. Red "CHK" for servicemode and yellow "CHK" for aging. 7.. Press POWER on the remote control to display the service adjustment modes menu, select adjustment by pressing the VOL right/left buttons and CH up/down buttons on the remote and ACTION to enter the adjustment. Don't have that manual handy, but this is from another. Leonard "Meat Plow" wrote in message news On Fri, 01 Dec 2006 12:43:08 -0500, Leonard Caillouet Has Frothed: Get the service manual. Negotiating the panasonic service mode is a PITA without it. Leonard I have the excerpt from the service manual regarding nagivating the menus. I just need an accurate list of steps to enter it. "Meat Plow" wrote in message news Help! -------------------------------------------------------------------------------- I am using the free version of SPAMfighter for private users. It has removed 20510 spam emails to date. Paying users do not have this message in their emails. Try SPAMfighter for free now! -- Pierre Salinger Memorial Hook, Line & Sinker, June 2004 COOSN-266-06-25794 -------------------------------------------------------------------------------- I am using the free version of SPAMfighter for private users. It has removed 20510 spam emails to date. Paying users do not have this message in their emails. Try SPAMfighter for free now! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Panasonic PT-51DX80A convergence problem | Electronics Repair | |||
Panasonic PT-51DX80A convergence problem | Electronics Repair | |||
Panasonic CT32E33G Low B+ | Electronics Repair | |||
Panasonic DT-51DX80a Issues | Electronics Repair | |||
Panasonic DT-51DX80a Issues | Electronics Repair |