Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Creative Audigy Platinum Ex problem with extension box.
I have this setup which came to me second hand and it works otherwise, but
the extension box is dead. It has a 78M05 regulator inside the extension box with no voltage going into it. The fuse is ok. The box is connected to the sound card inside the PC with a 44 pin special D-connector. According to the box backplate, this is a "Audigy Extension AUD_EXT) There are some hefty fuses on the sound card itself too, but they also tested OK. Anyone have any info or ideas? Thanks. Jan Finland |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Creative Audigy Platinum Ex problem with extension box.
"Jack" wrote in message ... I have this setup which came to me second hand and it works otherwise, but the extension box is dead. It has a 78M05 regulator inside the extension box with no voltage going into it. The fuse is ok. The box is connected to the sound card inside the PC with a 44 pin special D-connector. According to the box backplate, this is a "Audigy Extension AUD_EXT) There are some hefty fuses on the sound card itself too, but they also tested OK. Anyone have any info or ideas? Thanks. Jan Finland Problem spotted; missing external power cable ;-) Jan |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Goldstar CNR-2994P Tuner problem | Electronics Repair | |||
Viewsonic Vertical Problem | Electronics Repair | |||
Problem Installing Delta Extension Table On Unisaw | Woodworking | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair | |||
Illegal house extension demolished | UK diy |