 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Auto convergence re-enable after adjusting convergence in Hitachi 65SWX20B.
Replaced both convergence ICs and already adjusted & saved the data in
service convergence mode. But I have not found a combo to force a auto-convergence to memorize new settings. Now stuck in manual mode. Like I do with samsung as I do for service but no service manual for this hitachi model. Need this info on going through steps to do this to get auto-convergence working once again. Help? & thanks! Cheers, Wizard |
|
#2
Posted to sci.electronics.repair
|
|||
|
|||
|
Auto convergence re-enable after adjusting convergence in Hitachi 65SWX20B.
(Jason D.) wrote in :
Now stuck in manual mode. Like I do with samsung as I do for service but no service manual for this hitachi model. Need this info on going through steps to do this to get auto-convergence working once again. www.manualsparadise.com and www.servicemanuals.net way they have the service manual available for this model. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Toshiba Rear Projection Convergence board problem | Electronics Repair | |||
| ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
| ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
| Hitachi CT5081K Convergence | Electronics Repair | |||
Linear Mode
