Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
monitor HP P3902S -- dead
I was checking and i found Q405=2sk2161 and D402= 12 volt zener shorted
both. I replaced them, connect to power, it starts for a second, you can hear the click and the high tension and then turns off. Then i can't turn it back on. Q405 and D402 are still ok, . any ideas? Thanks |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT - Blue & Red | Metalworking | |||
1 3/8" thick door with dead bolt? | Home Repair | |||
Ever turn a dead leprechaun?!? | Woodturning | |||
Dead Leprechaun Coffins | Woodworking | |||
SmartUPS dead? | Electronics Repair |