Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#2
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]() stuart2z9sl wrote: I have a problem with monitor as follows: When switched on at mains - on/off green indicator light cycles on for 5secs then off for 1.5 secs then repeats sequence for as long as power is applied. The screen remains black except for slight flicker initially. The PSU and Inverter pcb is a Frontek FLF 1542-02A and although this looks OK from a visual inspection (no burnt components etc) so wonder if there are any other checks that anyone can suggest - bearing in mind that this is a home cure job not workshop. The monitor is a 2003 model with Part No 6901830000 Probably easier to bin it and get a new one - but theres no challenge in that. Stuart2z9sl (Gloucestershire - UK) -- stuart2z9sl ------------------------------------------------------------------------ It sounds most likely that the inverter is bad. Troubleshooting these things is not usually possible....best to replace it. If you cannot find the exact part, something designed for the same size monitor and number/size of CCFL tubes will probably work...with some mechanical adaption. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
packard bell laptop no display | Electronics Repair | |||
Packard Bell A720 stuck on "Soft power down" mode ? | Electronics Repair | |||
Help needed: Packard Bell A720 HYundai FCCID CKLA720 | Electronics Repair | |||
Packard Bell 1412sl schematics needed | Electronics Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |