LG 32" T.V. model # RU-32FC30, chassis # MC-022A, looks like the
unit was dropped, but customer said he didn't. Only two years old.
Purity is bad, like the yoke was pulled back, but convergence is dead
on. Are there any CRT issues with these units. It won't even degauss
externally. Thanks, Dani.

I have seen CRT's go defective in the way that the picture appears to have
lost its purity set up. This has to do with the position of the shadowmask
in the picture tube. I have seen on a few occasions this type of fault
developed in the picture tube. Most of the time, the fault is from dropping
or strongly jarring the set while moving it.

--

JANA
_____


"Dani" wrote in message
ups.com...
LG 32" T.V. model # RU-32FC30, chassis # MC-022A, looks like the
unit was dropped, but customer said he didn't. Only two years old.
Purity is bad, like the yoke was pulled back, but convergence is dead
on. Are there any CRT issues with these units. It won't even degauss
externally. Thanks, Dani.

"Dani" wrote in message
ups.com...
LG 32" T.V. model # RU-32FC30, chassis # MC-022A, looks like the
unit was dropped, but customer said he didn't. Only two years old.
Purity is bad, like the yoke was pulled back, but convergence is dead
on. Are there any CRT issues with these units. It won't even degauss
externally. Thanks, Dani.

Sounds to me the shadow mask has come loose. Like you said it must have been
dropped. New picture tube will be the only fix for that I fear.