Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3
Default Vertical line on Plasma

Hello,

Thought I'd post this question here to hopefully gain more knowledge on
what this problem can be before I have the repairman show up. I always
like to be a little knowledable about a problem before I speak with a
repairman.

So... I have a Sony KE32-TS2 Plasma television which a few weeks ago
developed a single row of vertical pixels that first was only visible
when the screen was blue. The pixels seemed to be greenish-grey in
color and went from the top of the screen to the bottom, all in a row.
Today it seemed to get worse and is now happening with other colors as
well.

Any ideas what would cause this? I am assuming this is covered under
my extended warantee, but wanted to see what you all thought before
they arrive.

Thanks in advance for your help.

  #5   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 31
Default Vertical line on Plasma

If you have only one month left for the warranty, ask about buying an
extension to the warranty. If you have to service your set outside of
warranty, you will find it very expensive!

--

JANA
_____


wrote in message
ups.com...
One month left in the extended warantee.... Sure glad it happened now!

Thanks for the reply!


Art wrote:
A single vetical or horiz line indicates a defective inbedded drive ic,
part
of the display assembly. Hopefully you have an extended warrenty on the
product.
"Max" wrote in message
...
wrote:
Hello,

Thought I'd post this question here to hopefully gain more knowledge on
what this problem can be before I have the repairman show up. I always
like to be a little knowledable about a problem before I speak with a
repairman.

So... I have a Sony KE32-TS2 Plasma television which a few weeks ago
developed a single row of vertical pixels that first was only visible
when the screen was blue. The pixels seemed to be greenish-grey in
color and went from the top of the screen to the bottom, all in a row.
Today it seemed to get worse and is now happening with other colors as
well.

Any ideas what would cause this? I am assuming this is covered under
my extended warantee, but wanted to see what you all thought before
they arrive.

Thanks in advance for your help.

According to symphtoms it is a bad plasma screen.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
LA7838 Vertical IC and Mitsubishi CS-3535R Mark D. Zacharias Electronics Repair 3 October 17th 05 09:33 PM
LA7838 Vertical IC and Mitsubishi CS-3535R Leonard Caillouet Electronics Repair 0 October 12th 05 12:08 PM
Furnace fuel oil pump return line, install or not? [email protected] Home Repair 3 September 29th 05 02:36 AM
Raster problem (bright vertical line and raster pulls in horizontally) with 31" Sylvania Rob Myers Electronics Repair 2 February 29th 04 01:16 PM
Big battle with WEIRD vertical deflection problem in PTK195 chassis. Asimov Electronics Repair 2 September 13th 03 02:29 AM


All times are GMT +1. The time now is 09:36 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"